CCTV INSTALLATION GUIDE
Tuesday, 8 March 2016 | Admin
After you have connected the cameras you can connect the DVR to the TV, monitor or screen using a VGA/HDMI cable.
If you can see an error message on the screen (out of range, no signal) it means the DVR resolution is not compatible with the screen. You need to connect the DVR to another screen/monitor and change the resolution to 1280x720p or1920x1080p.
To do this you need to go to the main menu on the DRV and click on login (Default username: adminDefault password: **leave it blank**)
On the general tab change the resolution to 720p or 1080p, click apply and reboot the DVR.
To use remote viewing on your mobile phone/tablet please check our website:
To use remote viewing on your computer/laptop please check our website:
To set up a Tenda USB wireless dongle please check our website: